This 15ppm Bilge Alarm meets the requirements of IMO Resolution MEPC. 107(49). Type-Approval Certificate in according with IMO Resolution MEPC. 107(49) therefore this satisfy international convention.
This 15ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15ppm.

The 15ppm Bilge Alarm should not be affected by emulsions and/or the type of oil and the response time must not exceed 5 seconds. The system must record date, time and alarm status, and also the operating status of the 15ppm Bilge Separator. The recording device must also store data for a minimum period of eighteen months and should be able to display or print a protocol for official inspections and should be so constructed that the alarm is always activated whenever clean water is used for cleaning or zeroing purposes.

Measuring range 0 - 30 ppm
Measuring accuracy 15 ppm ± 5 ppm [IMO Resolution MEPC 107(49)]
Set point 0 - 15 ppm
Response time time delay : 0 seconds [below 5 sec.]
Alarm contacts / rating normal / alarm contacts
Sources of electricity AC 100 - 220 V
Dimensions [W] 350 x [L] 270 x [H] 80 mm
Weight ± 10 kg




RAVEBO gebruikt cookies om deze website gebruiksvriendelijker te maken. Deze cookies hebben uitsluitend functionele, communicatieve of analytische doeleinden. Door gebruik te maken van deze website gaat u akkoord met het gebruik van cookies. Voor meer informatie zie ons Cookie Statement.
Ok Weigeren
Selecteer een afdeling.

Vul een naam in

Invalid Input

Invalid Input

Geef u bericht een onderwerp.

Voer een bericht in.

Invalid Input